The Laboratory Hot Air Drying Oven (GA-2004-B) is a digital PID-controlled test chamber for dry heat sterilization, drying and heat testing. If you are looking for a hot air laboratory oven in Bangladesh that holds a steady temperature and is simple to operate, this model covers the daily work of microbiology labs, pharma QC, food testing and university labs.
Want today’s price and stock? Message us on WhatsApp or call us. We will confirm the specification you need before you order.
What is a hot air laboratory oven?
A hot air oven is a chamber that heats air to a set temperature and circulates it around the load. It sterilizes and dries items with dry heat, with no steam or water involved. That makes it the standard choice for glassware, metal instruments and heat-stable powders that an autoclave would damage or leave wet.
Key features of the GA-2004-B
- Digital PID temperature control: the controller adjusts power continuously, so the chamber holds the set point with minimal overshoot.
- Digital display: set and read the temperature directly on the front panel.
- Stainless steel shelves: removable racks let you load glassware and trays in layers.
- Glass viewing window: check the load without opening the door and losing heat.
- Insulated chamber with door handle and seal: built for steady, repeatable runs.
What are the uses of a hot air oven in a microbiology laboratory?
The uses of a hot air oven in a microbiology laboratory center on sterilization and drying:
- Sterilizing glassware: petri dishes, test tubes, flasks, pipettes and slides.
- Sterilizing metal instruments: forceps, scalpels, scissors and needles.
- Sterilizing heat-stable powders, oils and waxes that steam cannot penetrate.
- Depyrogenation: removing heat-resistant contaminants from glass vials and containers.
- Drying washed glassware and samples before use.
What temperature and time are used for dry heat sterilization?
The commonly used cycle is 160°C for 2 hours or 170°C for 1 hour, counted from the moment the load itself reaches that temperature. Always follow your lab’s SOP and validate the cycle for your load.
What should not go in a hot air oven?
Do not put plastics, rubber, culture media, liquids or anything that melts, burns or evaporates at high temperature. Use an autoclave for those.
Hot air oven vs autoclave: which should you choose?
| Factor | Hot Air Oven | Autoclave |
|---|---|---|
| Method | Dry heat | Pressurized steam |
| Best for | Glassware, metal tools, powders, oils | Media, liquids, plastics, waste |
| Typical cycle | 160°C for 2 hours | 121°C for 15-20 minutes |
| Load comes out | Completely dry | Can be wet |
| Corrosion on instruments | None | Possible over time |
Many labs keep both: the autoclave for media and waste, and the hot air oven for glassware and instruments.
Who is this oven for?
- Microbiology and pathology laboratories
- Pharmaceutical and food quality control labs
- Universities, colleges and research institutes
- Hospitals and diagnostic centers
- Textile, chemical and materials testing labs
Who are the European manufacturers of hot air ovens for laboratory use?
Well-known European manufacturers of hot air ovens for laboratory use include Memmert and Binder in Germany, and Thermo Fisher Scientific (Heraeus). These brands are respected for tight temperature uniformity, but their ovens usually cost several times more and can take weeks to import. The GA-2004-B is a practical option for labs that need reliable PID-controlled dry heat at a budget-friendly price, with local availability and support in Bangladesh.
Frequently Asked Questions
What is the price of a hot air laboratory oven in Bangladesh?
Price depends on the chamber size and specification. Contact us for today’s price and stock.
What does PID control mean in a laboratory oven?
PID (proportional-integral-derivative) control continuously adjusts heater power, so the oven reaches the set temperature quickly and holds it without large swings. It gives more stable results than a basic on/off thermostat.
Can I use it for sterilizing petri dishes and test tubes?
Yes. Glass petri dishes, test tubes, flasks and pipettes are the most common loads. Wrap or cap them as your SOP requires.
How should I load the oven?
Leave space between items so hot air can circulate, and never block the vents. Do not let items touch the chamber walls.
Do you provide installation and after-sales support?
Yes. We help with delivery, setup and after-sales support in Bangladesh. Contact us with your location.
Message us today with your required chamber size and temperature range, and we will confirm the right hot air oven for your lab.
In Bangladesh, you can get the Hot Air Laboratory Oven GA-2004-B Digital PID Drying Oven from Johan Computer. We offer a wide range of laboratory equipment, hot air ovens, digital PID drying ovens, scientific instruments, and laboratory testing equipment at competitive prices.
For more related products, visit our internal links:
For official specifications, you can also visit the GONOAVA official website.
Contact Johan Computer today to get the latest price and availability of the GA-2004-B Hot Air Laboratory Oven in Bangladesh.







